Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post - CPES epoxy--

Slipknot · 06-13-2006, 07:22 PM

yep, I have done it. I even heated up the blanks first in a toaster oven like NIB does, but that is probably why the ones I did like that sink instaed of just float. Ya have to use a good primer.

when I made my plywood and epoxy boat, it required 2 part epoxy primer before I could put on the finish paint, reg. one part primer may have caused troubles but for plugs I think you can get away with something simple, and if Bernzy said so then I'd go with what he says.

06-13-2006, 07:22 PM	#5
Slipknot Super Moderator iTrader: (0) Join Date: Aug 2000 Location: Middleboro MA Posts: 17,125	yep, I have done it. I even heated up the blanks first in a toaster oven like NIB does, but that is probably why the ones I did like that sink instaed of just float. Ya have to use a good primer. when I made my plywood and epoxy boat, it required 2 part epoxy primer before I could put on the finish paint, reg. one part primer may have caused troubles but for plugs I think you can get away with something simple, and if Bernzy said so then I'd go with what he says.
	The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely. 1984 was a warning, not a guidebook! It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.