Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

numbskull · 11-17-2005, 12:52 PM

One more detail. If you can't drill on your lathe, you can through drill with your drill press as outlined in a prior thread, but you'll have to use a longer nail as the centering pin to clear the lower lip of the plug.

11-17-2005, 12:52 PM	#5
numbskull Oblivious // Grunt, Grunt Master iTrader: (0) Join Date: Nov 2005 Location: over the hill Posts: 6,682	One more detail. If you can't drill on your lathe, you can through drill with your drill press as outlined in a prior thread, but you'll have to use a longer nail as the centering pin to clear the lower lip of the plug.