|
My $8 winterizing tip... for Bait/Washdown Pumps
My $8 winterizing tip...
Tools needed
1 Toilet plunger
1 1" Spade drill and Drill
1 3' Section of an Old hose (Male End)
1 Gallon -50 RV Antifreeze (Per Pump)
Remove the handle from the Toilet Plunger... it unscrews
Drill the plunger in the center with the spade drill
Screw the male end of the hose into the rubber part of the plunger
Turn on your bait well or saltwater washdown pump
Put the plunger over the pumps sea strainer and the end of the hose into the gallon of antifreeze.
Hold the plunger tight against the hull and the pump will drink the antifreeze up in seconds...
$50 less than a Fake-A-Lake and it works better!
|