Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Slipknot · 11-30-2006, 11:04 AM

It's not rocket science Larry, 1/2" plywood will be fine for the side of a shed. If you want my opinion, OSB does NOT have the holding power of plywood. If you want to spend another 4 bucks a sheet above 1/2" ply and get the 5/8" , then be aware that it is also 4 ply thickness at Lowes-Homies, not 5 ply. It's just a shed but if you have the walls close to the ground , you might consider using pressure treated ply for the bottom 12 inches or so. good luck

11-30-2006, 11:04 AM	#14
Slipknot Super Moderator iTrader: (0) Join Date: Aug 2000 Location: Middleboro MA Posts: 17,125	It's not rocket science Larry, 1/2" plywood will be fine for the side of a shed. If you want my opinion, OSB does NOT have the holding power of plywood. If you want to spend another 4 bucks a sheet above 1/2" ply and get the 5/8" , then be aware that it is also 4 ply thickness at Lowes-Homies, not 5 ply. It's just a shed but if you have the walls close to the ground , you might consider using pressure treated ply for the bottom 12 inches or so. good luck
	The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely. 1984 was a warning, not a guidebook! It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.