..straightaway, autobahn, curvaceous... don't make no difference.
GT40 - 500HP / 2700 pounds / 5.4 pounds per horsepower
350Z - 287HP / 3200 pounds / 11.1 pounds per horsepower
Corvette - 300-400 / 3200 pounds / 8-10.6 pounds per horsepower
Viper - 500HP / 3400 pounds / 6.8 pounds per horsepower
Quote:
Chassis
As on the historic car, the composite body panels are unstressed. Instead of steel or honeycomb-composite tubs used in the 1960s, Ford's SVT Engineering group developed an all-new aluminum spaceframe as the foundation for the GT40 concept. It features four-wheel independent suspension with unequal-length control arms and longitudinally mounted spring-damper units to allow for its low profile.
Braking is handled by six-piston aluminum Alcon calipers with cross-drilled and vented rotors at all four corners. When the rear canopy is opened, the rear suspension components and engine become the car's focal point. Precision-milled aluminum suspension components and attached 19-inch Goodyear tires - combined with the overwhelming presence of the V-8 powertrain - create a striking appearance and communicate the GT40 concept's performance credentials.
Powertrain
The powerplant is an all-American V-8 from Ford's modular engine family. The MOD 5.4-liter V-8 in the GT40 concept features aluminum four-valve heads, forged crankshaft, H-beam forged rods and aluminum pistons fed by a supercharger, all combining to make more than 500 horsepower and 500 foot-pounds of torque. These figures match or exceed those of the most powerful period GT40, a car that could handily top 200 mph on the Mulsanne straight at Le Mans. Because of the supercharger and high-revving, free-breathing valvetrain, the new car produces this astounding power from an efficient 5.4-liter V-8 engine. The power is put to the road through an RBT six-speed manual
|
AWWWW!!!!! I WANT ONE!!!!!