|
first thing I did was install the lip after thru drill from back to the depth of first hook hole. I did not drill all the way thru as the lip where I installed it is not on center. Then used the lip to drill the hook holes to make sure they lined up with the lip. With the lip in place I also marked where the thru wire will go. Took off lip and drilled from front to meet the front hook hole and also the thru hole from the rear. The eyes were done by eye also using the lip for reference. Much easier than trying to match the lip to the belly holes and eyes and thru hole, because the lip is one of the harder ones to install correctly. IMO.
|