Quote:
Originally Posted by numbskull
... I also found with the system three Clear Coat stuff that I had to use a scale to mix small batches (syringes apparently have silicone that contaminated the epoxy and cause adhesion issues and measuring spoons gave inconsistent drying results), ....
|
If you use the syringes that you get at the pharmacy, you will have this problem. Try some from a rod building place. The latter do not have the silicon and work well.
Also agree with Freak, keep stuff clean and you will not have the problem. I wire after clear so I do not have to touch the plugs. No scratch coat for me.
Jigman