01-14-2007, 10:33 PM
|
#2
|
|
Super Moderator
Join Date: Aug 2000
Location: Middleboro MA
Posts: 17,125
|
Quote:
Originally Posted by Charleston
Wayyyy to complicated!!
Take a straight piece of coat hanger wire. bend a hook on one end and make a wave on the other end. Shove the wire into the through hole until is jams tight. Use this wire all the way from dipping in sealer to applyitn epoxy.
Sealer, you dip, wide, hang.
Prime, you spray and hang.
Top coat, you spray6 and hang.
Epoxy, you apply epoxy and clamp the wire in your vise with the plug on end facing up. Leave it there until you have the next plug done and need the vise. Hang the first plug and clamp the second.
After epoxy dries pull the wire inprep for adding hardware.
You only need to flip once with 2-Ton!
|
yep, that's kinda what I do
My wires have all different colors on them from using them over and over. |
The United States Constitution does not exist to grant you rights; those rights are inherent within you. Rather it exists to frame a limited government so that those natural rights can be exercised freely.
1984 was a warning, not a guidebook!
It's time more people spoke up with the truth. Every time we let a leftist lie go uncorrected, the commies get stronger.
|
|
|