Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

tlapinski · 01-27-2007, 12:32 PM

The drag was in working position when the picture was taken. I left the washers with the little bit of grease on them, thanks Numbskull for the tip though. I guess it sounds like I just never noticed the washer before I took it apart. I'll double chek next time I am in a shop that sells the reel.

01-27-2007, 12:32 PM	#5
tlapinski All up in the Interweb! iTrader: (1) Join Date: Mar 2002 Location: In the dog house. Posts: 5,215	The drag was in working position when the picture was taken. I left the washers with the little bit of grease on them, thanks Numbskull for the tip though. I guess it sounds like I just never noticed the washer before I took it apart. I'll double chek next time I am in a shop that sells the reel.
	Co-Host of The Surfcast Podcast ASMFC Striped Bass Advisory Panel - Connecticut "Out there in the surf is where it's at, that's where the line gets drawn in the sand between those who talk fishing and those who live it." - a wise man. One good fish, a sharpie does not make... Certified rock hopping billy goat.