Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

numbskull · 02-28-2007, 02:29 PM

This works as well. Drill a 1/4" hole, 1/2-5/8" deep. Fill it with 2 ton epoxy (do not use 5 minute) and insert a brass sinker eye. Do this before you seal the plug so the epoxy can penetrate into the grain. It is very strong.

02-28-2007, 02:29 PM	#6
numbskull Oblivious // Grunt, Grunt Master iTrader: (0) Join Date: Nov 2005 Location: over the hill Posts: 6,682	This works as well. Drill a 1/4" hole, 1/2-5/8" deep. Fill it with 2 ton epoxy (do not use 5 minute) and insert a brass sinker eye. Do this before you seal the plug so the epoxy can penetrate into the grain. It is very strong.