|
For a sealer.I use the sb-112 It's made for surfboards an makes a tough as hell plug..i heat em up so it soaks in..It's a PITA thats why I have all these turned plugs to do..I also prime an sand to take out any imperfections to me thats what primer is all about.A sandable base coat that u can build an sand.I don't worry when I go too deep on the last sanding as i use a opaque white or black as a base coat when I paint em..I generally end up with 2 coats of primer that are sanded down to a very thin layer.I think keeping the paint layers thin will add to the durablity of the finish.I have this hard plug then a hard top coat the last thing I want is to have a big buildup of soft paints in between..
|