Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

RIROCKHOUND · 05-21-2007, 01:07 PM

Paul,
Tin or glass?

Glass:
What I did was get dowels the same size as the hole cut to just shorter than your transom thickness (snug diameter though I had to tap w/ a mallet) coat them and the hole w/ West System Resin... tap them in, let dry. then seal in/outboard edges with 5200..

worked for me and I had all materials on hand...

05-21-2007, 01:07 PM	#2
RIROCKHOUND Also known as OAK iTrader: (0) Join Date: Apr 2003 Location: Westlery, RI Posts: 10,408	Paul, Tin or glass? Glass: What I did was get dowels the same size as the hole cut to just shorter than your transom thickness (snug diameter though I had to tap w/ a mallet) coat them and the hole w/ West System Resin... tap them in, let dry. then seal in/outboard edges with 5200.. worked for me and I had all materials on hand...
	Bryan Originally Posted by #^&#^&#^&#^&#^&#^&#^&#^&#^&#^&#^& "For once I agree with Spence. UGH. I just hope I don't get the urge to go start buying armani suits to wear in my shop"