this is what you can do.....
as i worked
for a year in a lawn mower shop ok...
i can fix any engine...
and as f18 might also say... it's either spark or gas....
for you it seems to be gas...
so you become the carburator ....find an old
eye drops bottle
or something you can convert into a mini squeeze gas bottle!
pull the plug and prime the hole with a
little squirt of gas & replace plug
then get ready to pull and squirt gas into the carb...simutaneously
you might have to remove the air filter obviously...
and
see if you can
by pass the fuel system
and see if it runs for as long as you squirt gas.
if so,,,, then your gas isnt reaching
where it's supposed to go..
the needle valve is stuck...or something
is plugged up... be careful when you
pull the carb bowl off...or linkage..<<<-----
take digital photo's or make drawings and don't depend
on your memory... period.. unless you have a schematic .
-------------------------------------------------------------------------
my troybuilt tiller is doing the same thing..actually
and i'm going to
kick it's butt today....
