Quote:
Originally Posted by taJon
|
pics. Make sure you keep design notes.. I want one for under my leaning post..
i fatally f'd up when i built the foam mold i forgot to compensate for the front of the console angle.
the top of the consol pitches down toward the stern but the front of the console is higher than the back of the console. so to make it look flush in the front of the console the back of the box angle pitches maybe 30 degrees to the bow. Side profile kind of looks like a flat top triangle. So electronics box part 3 coming up.
this time luan frame again (already made). too much work making the foam mold and im running out of warm days. good news is I have all the parts I need (extra from the last two attempts) so I won't be out any extra money. and Im that much better with fiberglass now so it should be at least 3 times as good.
