Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 11-18-2007, 05:57 PM

Is it the shifter or cables?? If its the shifter just get the thing apart and spray lithium grease in there.

If its the cables, you might have to pull and inspect it. If its ripped somewhere along the length and its corroding it will just get worse, and could fail (just image how that could turn out)
I know they run cable in a torturous route in CCs. At least you can get a good look at it, deal with the whole thing and lube it well. I'd use lithum grease.
Good Luck

11-18-2007, 05:57 PM	#2
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Is it the shifter or cables?? If its the shifter just get the thing apart and spray lithium grease in there. If its the cables, you might have to pull and inspect it. If its ripped somewhere along the length and its corroding it will just get worse, and could fail (just image how that could turn out) I know they run cable in a torturous route in CCs. At least you can get a good look at it, deal with the whole thing and lube it well. I'd use lithum grease. Good Luck
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.