Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

maddog2020 · 12-25-2007, 10:29 PM

If you need your VS service it will still be done in Tulsa, OK. Assembling the VS is a cake walk. It is a dumb fishing reel not a part for the aerospace industry. This isn't rocket science .... LOL.

Regardless of where it is made and as long as they use the correct material to make the parts it should be easy. Setting up the tooling is critical. Stealing the design is a joke - any one with a pair of calipers can copy the thing IMHO. There isn't anything special about it.

So many goods are made abroad now.

Look at all the nice fishing rods coming out of China now for CHEAP $. Top quality Fuji parts: hardloy guides, reel seat, neoprene shrink wrap and so forth for under $100. Tsunami and other brands have adjust THEIR prices, but why NOT some of these other companies?! You can make the $ thru volume OR make it as lower cost and pocket the $. WC Bradley is pocketing the $$ they save for the Van Staal reels made in China.

Isn't this the American way?! Sorry to be sarcastic. I'm not buying into the newer style VS reels period. If I decide to keep them, I'll stick with the US made ones.

I don't doubt that VS reels made abroad will be the same or better quality of the US made ones. I've seen plenty of US made black VS with mis-matched anodizing out there where it was more of a deep purple than it was black.

Zeebaas aren't flawless. First batch had issues of the spool gasket bottoming out on the rotor underneath. They were made aware of it and fixed it, BUT the stack up tolerances bit them on that one.

They were lacking on QC there for sure. You would think that those first hundred would have been "perfect" before they released them out to the dealers! ZB knew what they were up against with anal anglers...... LOL. There must be other glitches with it I am sure. JohhR - your ZB perfect or ya got some issues with yours?! I bet those who did get one are embarassed to admit they are some problems. I know the guy who designed the reel is always interested in getting feedback on the ZB. Retail prices on a longer power handle with a different knob is PAINFUL! OUCH ..... some good $ for one.

Look at the country of origin on consumer goods - 90% of the stuff out there is from Asia. Most of it is fine. They just need to understand we don't USE lead paint any more! It would be extremely hard to buy ALL US made products for everything now a days.

Man, it IS going to be a longer winter.

12-25-2007, 10:29 PM	#1
maddog2020 Registered User Join Date: Jun 2003 Location: MA - Ol' New England - USA Posts: 791	If you need your VS service it will still be done in Tulsa, OK. Assembling the VS is a cake walk. It is a dumb fishing reel not a part for the aerospace industry. This isn't rocket science .... LOL. Regardless of where it is made and as long as they use the correct material to make the parts it should be easy. Setting up the tooling is critical. Stealing the design is a joke - any one with a pair of calipers can copy the thing IMHO. There isn't anything special about it. So many goods are made abroad now. Look at all the nice fishing rods coming out of China now for CHEAP $. Top quality Fuji parts: hardloy guides, reel seat, neoprene shrink wrap and so forth for under $100. Tsunami and other brands have adjust THEIR prices, but why NOT some of these other companies?! You can make the $ thru volume OR make it as lower cost and pocket the $. WC Bradley is pocketing the $$ they save for the Van Staal reels made in China. Isn't this the American way?! Sorry to be sarcastic. I'm not buying into the newer style VS reels period. If I decide to keep them, I'll stick with the US made ones. I don't doubt that VS reels made abroad will be the same or better quality of the US made ones. I've seen plenty of US made black VS with mis-matched anodizing out there where it was more of a deep purple than it was black. Zeebaas aren't flawless. First batch had issues of the spool gasket bottoming out on the rotor underneath. They were made aware of it and fixed it, BUT the stack up tolerances bit them on that one. They were lacking on QC there for sure. You would think that those first hundred would have been "perfect" before they released them out to the dealers! ZB knew what they were up against with anal anglers...... LOL. There must be other glitches with it I am sure. JohhR - your ZB perfect or ya got some issues with yours?! I bet those who did get one are embarassed to admit they are some problems. I know the guy who designed the reel is always interested in getting feedback on the ZB. Retail prices on a longer power handle with a different knob is PAINFUL! OUCH ..... some good $ for one. Look at the country of origin on consumer goods - 90% of the stuff out there is from Asia. Most of it is fine. They just need to understand we don't USE lead paint any more! It would be extremely hard to buy ALL US made products for everything now a days. Man, it IS going to be a longer winter.
	Ray 'md2020'