Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post - Trailer Thread

Van · 01-28-2003, 12:11 PM

Mr Macey:

I had the exact same problem on my loadrite.
I pulled the wiring back a bit and respliced with crimp connectors
and covered the joint with liquid electrical tape.
All fixed.

I also found where the wires connect to the main taillights, there is a "push-in" type connection. I had loose wire problems (intermittent connections) when it was brand new. I soldered the wires to that push in part, and again coated it with liquid tape. Been fine ever since.

You should have posted earlier.

01-28-2003, 12:11 PM	#2
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Mr Macey: I had the exact same problem on my loadrite. I pulled the wiring back a bit and respliced with crimp connectors and covered the joint with liquid electrical tape. All fixed. I also found where the wires connect to the main taillights, there is a "push-in" type connection. I had loose wire problems (intermittent connections) when it was brand new. I soldered the wires to that push in part, and again coated it with liquid tape. Been fine ever since. You should have posted earlier.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.