Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 05-06-2008, 07:49 PM

I sure like PB blaster. Worth a try with the heat and breaker bar.

Make sure you use NEVASEEZ when you reinstall.
I just got my flat off and replaced with the spare.
Those nuts and studs were covered with rust but came right off, the threads still had nevaseez on them after more than 8 years.

05-06-2008, 07:49 PM	#4
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	I sure like PB blaster. Worth a try with the heat and breaker bar. Make sure you use NEVASEEZ when you reinstall. I just got my flat off and replaced with the spare. Those nuts and studs were covered with rust but came right off, the threads still had nevaseez on them after more than 8 years.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.