Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 02-06-2003, 04:46 PM

Mr. M:

when I trailered I always put wood under the jack wheel.
I took my skill saw went back and forth and cut a wide curved
groove for the wheel in a chunk of 4X4.

In the winter, I put blocks under the axle (bothg sides) so when the tires sink a bit, or loose some air, the weight is shifted to the blocks. Also keeps from losing too much air over the cold months.

02-06-2003, 04:46 PM	#5
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Mr. M: when I trailered I always put wood under the jack wheel. I took my skill saw went back and forth and cut a wide curved groove for the wheel in a chunk of 4X4. In the winter, I put blocks under the axle (bothg sides) so when the tires sink a bit, or loose some air, the weight is shifted to the blocks. Also keeps from losing too much air over the cold months.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.