Quote:
Originally Posted by Mike P
Cut them at the fattest part, behind the head. An inch should do it. Then pinch the barb(s) off the jighead's collar, and use superglue to hold the plastic to the head. I've tried a bunch of glues, including both formulas of Zap-a-Gap, and found that the best is Loctite Precision super glue. Less than 2 bucks for 4 oz at Wally World.
|
After cutting the barb apply the glue to the shaft and for a little extra hold apply some glue to the back of the lead head. There was a huge difference in holding power for me when adding the glue to the shaft.