|
one more question that just occured to me...maybe this should be in a different thread....which System3 epoxy were you using? they have a variety of products...I use the waterbased polyurethane(mainly because it's an exterior marine grade product) for painting additives and sealing the paint job...but the finish epoxy that I've been using is the SB-112... it's the one used for surfboards....
I've noticed a lot of compatibility issues over the years with many products....some will create a surface residue as a result of the curing process, there have been many instances where I tried to put one coat over a previous coat of another product(both waterbased) and they just don't like each other...and of course...if you eat a bag of chips, handle your plugs and then try to epoxy them...there will be problems...
|