Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

eskimo · 01-20-2009, 02:07 PM

just an idea, I'm sure many have something similar.

I realized just last week that tail stock was 1/4" higher then the head stock on my lathe (pretty stupid I know). Since I fixed it Ive had a problem thru drilling/boring.

I've had a dowel center for some time now to use on the drill press but ever since I started boring I haven't went back. I would just hold the stock leveled (or what I thought to be leveled) and went from there.

After messing up 4 out of 20 pieces of my longer stock I decided I was going to make a jig that fit the same way my HM duplicator jigs fits. works great and I no longer have hold each piece balanced until finished.

what are you guys using?

01-20-2009, 02:07 PM	#1
eskimo ____________ iTrader: (0) Join Date: Jun 2008 Location: new bedford, Ma. Posts: 651	thru drilling/boring just an idea, I'm sure many have something similar. I realized just last week that tail stock was 1/4" higher then the head stock on my lathe (pretty stupid I know). Since I fixed it Ive had a problem thru drilling/boring. I've had a dowel center for some time now to use on the drill press but ever since I started boring I haven't went back. I would just hold the stock leveled (or what I thought to be leveled) and went from there. After messing up 4 out of 20 pieces of my longer stock I decided I was going to make a jig that fit the same way my HM duplicator jigs fits. works great and I no longer have hold each piece balanced until finished. what are you guys using? Attached Thumbnails Last edited by eskimo; 01-20-2009 at 02:27 PM..
	Nobody calls me Lebowski. You got the wrong guy. I'm the Dude, man.