Quote:
Originally Posted by Canalman
Have you tested to see if it leaves a residue behind that might interfere with your clear coat? Seen that happen a few times and boy does it suck! 
-Dave |
the one that I've finished is twirling now, no issues...no silicone in this product(latex, water, ammonia), and it's doesn't touch the plug while it is curing because it is covered w/tape, the ammonia could eat into a previous coat possibly but they don't come in contact when you are laying it out...I could see that a silicone product would definitely be a culprit if you stuck it on your plug in a similar manner, that stuff seems to leave residue even after it is cured.... I've used this latex for masking for years and never had any problem with adhesion over the masked areas and subsequent coats...