|
The SOL rodboard has its first post sticky and it show a gazzilion different wraps. You have to figure out how to do them but at least you can see a whole bunch of different ones to give you ideas.
After doing many , you can usually figure out how to do them if you have a good picture of the finished product.
Some people like the little eva foam cone behind the reel seat so there hand doesn't have the square end of the reel seat digging into it , especially conventional reel seats. I like to use a dremel and the rod lathe to chamfer the back corner on the conventional reel seats sometimes so the eva is not needed. I don't like the feel of eva when its wet and after it gets slimmy from use.
|