|
If you have no lathe experience I would recommend simply turning some shapes to get a feel for the tools, possibly find a book about turning so you can get an idea of the proper technique. If you have experience try turning some known plugs as Numbscull suggests to get a feel for the process and an understanding of form and function.....also test your finished plugs (prototypes)prior to the finishing proess to make sure they perform as you wish. Its best to test them in the water naked to be sure they do as you wish prior to sealing, priming, painting so you do not waste alot of time on a plug that does not give you the proper action. I presume you also have fishing experience? You need this to know what you may be looking for in a plugs action? You don't speak much of your experience so its difficult to advise?
|