Quote:
Originally Posted by Pete F.
1. I ground my own out of a pair of good sized needlenose, only one jaw is round. There is an advantage to that.
2. I use 3/16 from the back and 1/8 from the front
3. Tight wire and a 1/8 hole holds them, then I epoxy after they are wired and that helps too.
|
Ditto about 1.
2. I don't do thru drilling so no comment.
3. Holes drill thru the part of lip that is in the body and epoxy lets the epoxy act as "pin" to hold the lip in place.
