Quote:
Originally Posted by Eric Roach
What are you using for epoxy and thinner? Do you dip or brush? Just curious. I have Flex Coat, Aftcote and some others in my rod room.
|
I mix etex up per directions. Thin it with denatured alcohol, 50%.
So if your using 1 ounce resin, 1 ounce hardener, use 1 ounce DA.
Heat up the blanks. Pour the mixture from one cup into another, pouring it over the blank/in the holes. It will be thin and coat quickly.
Hang the blanks to drip bit and dry. DO NOT DO THIS INDOORS. It is bit messy. I do it in the garage, then move the blanks into my basement to dry overnight.