|
To explain a dacron splice through a web site may be next to impossible. However, once you see a visual it is very simple to understand and complete. Basically, you are making a conection with two loop knots. The wire is a bisic Haywire twist (lope A) and the dacron is spliced (lope B) . To splice dacron you need to buy or make a splicing needle.
Starting twelve inches from the tag end, insert the splicing needle into the dacron and fish it through the dacron for approx. 6 inches. Once you fish through 6 inches of dacron, poke the needle back through the wall. Insert and 1/8" of the tag end into the needles hole and pull the tag end back through the center of the dacron.
I told you it was going to be hard to explain over the internet. Anyhow, It is very succesful and if you need more help ask a local tackle dealer or let me know and we can connect some how.
Geoff
|