|
A roll of tie wire, it's the soft iron stuff used to tie rebar together. Cut about 8" pieces, bend a hook on one end, on the other put a soft bend in it. Stickit in the thru wire hole, dip in sealer and let it drip, when the sealer is dry you can hold the plug with it and paint it. I then wire mine and epoxy and hang them from another piece of wire with a hook on each end.
Wooden handscrew, good ones made by Jorgenson. great for all sorts of clamping things and you can clamp your plugs by the tail loop and epoxy them.
A toolrest that is at least 8" for your lathe, so you don't have to move it to turn plugs.
|