sorry ,like I said,sold that machine a year ago,oh well
Quote:
Originally Posted by kevinthegood
you can make a jig out of 1/4'' plywood, drill the holes where you want them, it will work for both the front holes and the back ones, put a piece of tape on drill bit, if i find the one i have i will give it to you at plugfest.
|
Better to use a stick of solid wood about 3" wide x 3/4" thick, drill your holes on the drillpress,then use that as a template. Put your bit in drill with a short block of wood on it so you don't go thru the side of the case,adjust length of block to set depth of hole another words. I use a 5mm bit bradpoint, most nice pins are 5mm, I think the old 1/4" leave too large a hole in an open set of bookcases.
goodluck Ross