Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 04-24-2003, 10:08 AM

Bloo:
Let me check the "exact" thicknesses of the anchors I've made.

The one in the first pic was way too strong and if 3 tines hook on good, I could barely get it out with 175 horses pulling on it "hard".

The one in the last pic worked OK, but it was a bit light and occasionally came unhooked, with bouncing.

If your trying to bend a piece by hand and it seemed flimsy, try bending 2 pieces at at time, because at least 2 should be caught for a good set.

I will check tonight and post later.

V.

04-24-2003, 10:08 AM	#46
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Bloo: Let me check the "exact" thicknesses of the anchors I've made. The one in the first pic was way too strong and if 3 tines hook on good, I could barely get it out with 175 horses pulling on it "hard". The one in the last pic worked OK, but it was a bit light and occasionally came unhooked, with bouncing. If your trying to bend a piece by hand and it seemed flimsy, try bending 2 pieces at at time, because at least 2 should be caught for a good set. I will check tonight and post later. V. Last edited by Van; 04-24-2003 at 10:10 AM..
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.