Quote:
Originally Posted by The Dad Fisherman
Dad's planning on taking it.....probably gonna come down this weekend.
Just to make sure.....my bed is roughly 6 foot long....this sound about right?
|
sounds right to me... if you have a bed liner of the PVC variety, you will need to cut 4 slots for the allowance of the 4 C clamps that hold the cap down to the lip of your bed..... Id say 2 inches wide by 3 or 4 inches up and down right at the edge of the lip. You can do that now, or do it when you grab the cap, but keep in mind that the cap is in my storage space and i dont have any tools there..
Obviously, each clamp goes on each corner of the bed