[Adam_777]

Originally Posted by RIROCKHOUND

The list is below:

I would have thought for a 4000ish serial number a lot of these would have been 'wear' parts as part of the service charge. If anyone knows from experience these are wear parts, let me know. The only one I can see is the roller is a non-wear.

I already sent a sharply worded email back to them.

1 SERVICE - ANNUAL SERVICE FEE 49.95
1 ORQ2 - O-RING, QUAD CROSS SECTION, BUNA .281 X .070 0.44
1 OSPR2 - CUP SEAL, STEEL CLAD, .375 X .562 X .125 3.60
1 OSPR4 - CUP SEAL, STEEL CLAD, .500 X .750 X .125 2.20
1 ORR5 - O-RING, METRIC, 53MM ID X 1MM CROSS SECTION, BU 1.59
1 ORR6 - O-RING, .864 INCH ID X .070 CROSS SECTION, BUNA 0.12
1 WSLCIT1 - WASHER,LOCK,INTERNALTOOTH,10-32 STAINLESS ST 0.53
1 BGRS3 - BEARING, RADIAL, METAL SHIELDED, METRIC 4.13
1 BGND1 - BEARING, NEEDLE, CAGED OPEN END, METRIC 3.52
1 BGRC1 - BEARING ROLLER CLUTCH 13.48
1 BGRO2 - BEARING,RADIAL,OPEN 3.25
1 90000 - MISCELLANEOUS PART SEE TEXT 0.00
1 SR2039 - SR200/250 SEAL CARRIER 3.28
1 VSB2024P - 200/250 SPOOL RETAINER - PASSIVATED 4.50
1 VSB2040P - 200/250 SPOOL HUB - PASSIVATED 12.93
1 ORR3 - O-RING, METRIC, 9MM ID X 2 MM CROSS SECTION, BU 0.10
1 SR3020 - LINE ROLLER 21.57
2 OSPR3 - CUP SEAL, STEEL CLAD, .750 X 1.00 X .125 4.56
4 SR3038-2 - CARBON FIBER SHEET 1MM THICKNESS 5.84
---------------------------------------------------

Eighty bucks for an overhaul and a service is a good deal if you ask me.Not to be a jackass but the 3 bearings in the side cover can't be replaced all that easy.After a service like that you should be set for a bunch of years.Depending on how long you hold it underwater on each trip.I use marine grease and gear oil in mine.I'll take mine to CT for any major repairs I can't do myself.I'd pay 80 bucks for that service if the reel doesn't need it again for at least five years.I treat mine like a red headed stepchild and it keeps coming back for more.Best reel I've ever owned and hopefully the last saltwater spinner I'll ever buy.