Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

adson · 04-03-2010, 09:43 AM

no you don't need a chuck on the other end
you just center the blank on the point of the tail end and slowly slide the tail towards the drill bit.
a 1/2 inch at a time and then clear the chips
not clearing the chips will make the bit wander

04-03-2010, 09:43 AM	#6
adson Registered User Join Date: Oct 2004 Location: north andover, ma Posts: 67	no you don't need a chuck on the other end you just center the blank on the point of the tail end and slowly slide the tail towards the drill bit. a 1/2 inch at a time and then clear the chips not clearing the chips will make the bit wander