Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

a4scoot · 05-05-2010, 06:04 AM

Depends on how you removed it. If it was removed completely instead of loosening the two posts and lifting it off you will need to reset it completely. The bit should align with the centers of the headstock and the tailstock when the carrage is moved from left to right. Charlestown showed how to use 3/4 collars on the uprights to make it easy to realign the dupe after it is removed to hand turn. You dont need to remove the mounting brackets just loosen the two bolts and lift the dupe off. When you put it back it is at the right height because of the collars.

05-05-2010, 06:04 AM	#3
a4scoot Registered User Join Date: Jan 2008 Location: Charlestown, RI Posts: 46	Depends on how you removed it. If it was removed completely instead of loosening the two posts and lifting it off you will need to reset it completely. The bit should align with the centers of the headstock and the tailstock when the carrage is moved from left to right. Charlestown showed how to use 3/4 collars on the uprights to make it easy to realign the dupe after it is removed to hand turn. You dont need to remove the mounting brackets just loosen the two bolts and lift the dupe off. When you put it back it is at the right height because of the collars.
	Life's Journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways,totally worn out, shouting, ' Holy sh!t... What a Ride!!