Quote:
Originally Posted by Back Beach
Joe,
Anything to report on the tung? I just purchased some after reading your post about switching to tung and want to try it out on my next batch of plugs.
|
yup... although I did not fish plugs as much this season ( fussy fish = eel use) I soaked them enough to be convinced that this is the way to go..
One "go to" plug in particular got hook scarred and blue fish attacked pretty good, most of the epoxy and paint was removed from the exterior of the hook areas....I had planned on cutting it appart to check for water stain/intrusion when I was done fishing at the end of the season... but last Saturday a freight train took me through the mooring field.. she shoud be entering the canal post haste.. towing about 20 yards of 15lb Ande and my PLUG!...
Aside from that, I've got a few goo-goo's that stood up to about 20 hours each of wire line trolling and a hundred fish or so between them... the plugs are beat up but do not appear to be soaking any water...I'll be giving them the " band saw Eddie" treatment when I hang up my rods for the season..
The only thing that has not had a good test are the darters, which are birch and maple, but the boat's coming out of the water Sunday... so the rest of the season I'll be rock hopping and jetty jumping and will beat them on the rocks( and hopefull some fish beat them as well)...I'll know by the end of the month for certain..
as an aside/benifit... the plugs sealed in tung oil ( I leave the cases in the boat and they are subjected to heat and cold more than the ones hanging or packed in bags in the shop) showed no sign of bleed through.... sommething I can say happend to quite a few plugs I sealed in BLO.. as the Clorox comercial said " the whites stay whiter"