Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

ed morini · 11-28-2010, 05:12 AM

CPES Warm Clear Penetrating Epoxy Sealer MultiWoodPrime and Rot Repair - System Three Resins, Inc. These are just two of the many

Check out the above links CPES has been around awhile as well as some others, If I remember correctly System 3 bought out the line of T-88 epoxies just for their sealers.

Jamestown's CPES sells for $179/gal, mixed Raka at $100/gal, then cut, would $25/gallon, and does the same thing. As far as safety goes, one should always know the parameters of materials being used. Xylene, BLO&thinnner, lacquer thinnner, AND epoxy with solvents same (that why I use Raka.. no solvents) BOOM. THe thinned epoxy doesn't need to be heated to work. It IS as dangerous as heating any solvent or petroleum or resin based (turpentine).

11-28-2010, 05:12 AM	#19
ed morini Registered User iTrader: (0) Join Date: Feb 2002 Location: holliston,ma Posts: 120	sealing CPES Warm Clear Penetrating Epoxy Sealer MultiWoodPrime and Rot Repair - System Three Resins, Inc. These are just two of the many Check out the above links CPES has been around awhile as well as some others, If I remember correctly System 3 bought out the line of T-88 epoxies just for their sealers. Jamestown's CPES sells for $179/gal, mixed Raka at $100/gal, then cut, would $25/gallon, and does the same thing. As far as safety goes, one should always know the parameters of materials being used. Xylene, BLO&thinnner, lacquer thinnner, AND epoxy with solvents same (that why I use Raka.. no solvents) BOOM. THe thinned epoxy doesn't need to be heated to work. It IS as dangerous as heating any solvent or petroleum or resin based (turpentine).