Quote:
Originally Posted by ecduzitgood
Try this Evirotex sealer (it's gloss but you will scuff it), I have sprayed it over decals and would suggest several light coats and you might want to test it on a sample to be sure of compatibility. I would still use the gloves to install the eyes and grommets etc and follow with Envirotex finish coat, I don't/haven't used system three yet so you might want to make sure it's compatable before risking a problem.
Attachment 42748 |
That's the same stuff I use....never had a problem, as long as you do scuff it.....don't forget to take a scotchbrite pad to it or the epoxy can peel.