Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

likwid · 12-29-2010, 08:09 PM

Its not that bad as long as you don't go too thick.

Diamond table saw blade will do it fine. It will chew up teeth on everything else.

Make sure to bed with 4200 on BOTH sides (around the bolts).

If you really wanna make sure you have no core penetration, oversize the holes, fill with epoxy, redrill.

12-29-2010, 08:09 PM	#5
likwid lobster = striper bait iTrader: (0) Join Date: Jul 2002 Location: Popes Island Performing Arts Center Posts: 5,871	Its not that bad as long as you don't go too thick. Diamond table saw blade will do it fine. It will chew up teeth on everything else. Make sure to bed with 4200 on BOTH sides (around the bolts). If you really wanna make sure you have no core penetration, oversize the holes, fill with epoxy, redrill. Last edited by likwid; 12-29-2010 at 08:17 PM..
	Ski Quicks Hole