Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 06-17-2003, 04:01 PM

Does the grinder plate have big holes ?

I have both 3/8" plate holes and 1/2" plates on my power grinder.
Helps alot when grinding whole fish.

Tip....Keep the plate and cutting blade free from corrosion, or you will lose cutting efficiency real fast and it will clog all the time. I grind at home so there is no salt water around, then I clean and oil the plate and blade after use.

Good Luck...

06-17-2003, 04:01 PM	#5
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	Does the grinder plate have big holes ? I have both 3/8" plate holes and 1/2" plates on my power grinder. Helps alot when grinding whole fish. Tip....Keep the plate and cutting blade free from corrosion, or you will lose cutting efficiency real fast and it will clog all the time. I grind at home so there is no salt water around, then I clean and oil the plate and blade after use. Good Luck...
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.