Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Van · 10-25-2011, 10:53 AM

The motor could be mounted too high.

The cavitation plate should be at the same height (level) as the hull when they are parallel.

That is hard to change unless you can; and want to, unbolt the engine and move it down.

If all else fails, you could add the fin on top of cav plate, they do work.

10-25-2011, 10:53 AM	#4
Van zoom iTrader: (0) Join Date: Apr 2002 Location: Quincy Posts: 4,145	The motor could be mounted too high. The cavitation plate should be at the same height (level) as the hull when they are parallel. That is hard to change unless you can; and want to, unbolt the engine and move it down. If all else fails, you could add the fin on top of cav plate, they do work.
	~..~..~.. ><((((º> Things done at the last possible minute are done with the greatest possible information. Procrastination is, therefore, the most efficient means of doing things.