Quote:
Originally Posted by Mugz
It says "Spray" on the can....brushing is NOT an option. I will take a picture and you'll see what I mean.
I will look for that paint....might do a chair this weekend as a test piece.
By the way, it's really not a wrought iron table....a steel mesh table.
|
Use the Sem rust shield Mike suggested.
You can get it in gal or quarts.
The stuff dries hard as a rock.
Don't really need to go crazy sand blasting or sanding/grinding.
Wire wheel, scrape, sand and wash before applying.
You can also get Rustoleum at home depot in qts or gal.
They have a bunch of colors and primers. Spraying is a bit tougher as it's a bit thick to spray through a spray gun even with a 1.7 - 2.0 tip / cap