|
I used some 2x4s, 1x4s, U-Bolts, PVC Couplings, PVC pipe and the platform that the pvc pipes are sitting on is an actual deck step. I think I cut the angle on the 2x4s at around 35 degress. I made sure the tip of a 10ft rod is less than 10ft so I can go through the D&D drive thru. This setup cost me around $60 and a couple of hours to make. It weighs nothing and is easy to just slide right out if you need to haul something. The extra 1x4s across the back are there to support a 120qt cooler.
|