Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

nightfighter · 09-05-2012, 09:36 AM

Gilly,
You will need a supply of straight razor blades, extra fine scotch bright pad or 600-1000 wetsand paper, a couple rod supports, some quiet time and patience. Try cutting under the guide foot from the side. A lot depends on the condition of the epoxy and whether it was underwrapped. Gets dicey when getting close as you want to avoid cutting into the blank at all costs.

09-05-2012, 09:36 AM	#2
nightfighter Seldom Seen iTrader: (0) Join Date: May 2001 Posts: 10,543	Gilly, You will need a supply of straight razor blades, extra fine scotch bright pad or 600-1000 wetsand paper, a couple rod supports, some quiet time and patience. Try cutting under the guide foot from the side. A lot depends on the condition of the epoxy and whether it was underwrapped. Gets dicey when getting close as you want to avoid cutting into the blank at all costs.
	“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.