Last month I finished up an IGFA 80 Calstar used Gudebrod NCP, green, yellow and charcoal. Was a little dissapointed what the charcoal looked like after finishing but whatever.......however what I will tell you is I used a size A double underwrap with green. First time I ever saw this it was a bit fussy and hence the first coat of finish was like 60 grit. This being a HD tuna rod it needed 4 coats and by then you'd never know. After the job I tossed that spool of A green away figuring something was not right with that spool. This rod I ended up scuffing up the wrap finish with scotbrite before the next coat, i don't usually do that but am thinking about doing it more often.
Did a nice maze decorating wrap on the butt looks nice.
Last edited by beamie; 03-08-2013 at 07:36 PM..
|