Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

Stewie · 08-08-2011, 03:58 PM

Drill a half inch hole about two or three inches from the top of the tube. Cut two slots down to the outside edges of the hole with a hacksaw. Sand the edges smooth.

08-08-2011, 03:58 PM	#9
Stewie Scarecrow iTrader: (0) Join Date: May 2003 Location: bedford ma Posts: 637	Drill a half inch hole about two or three inches from the top of the tube. Cut two slots down to the outside edges of the hole with a hacksaw. Sand the edges smooth.
	.......Elvis Lives