View Single Post
Old 10-28-2011, 05:28 PM   #7
Stewie
Scarecrow
iTrader: (0)
 
Stewie's Avatar
 
Join Date: May 2003
Location: bedford ma
Posts: 637
My spud is made up of two 30 inch pieces of gas pipe. One is 1 inch stuff and has a 2 1/2 inch wide chisel welded to the bottom. The top end is threaded and is attached to a piece of 1/2 inch gas pipe via an adapter. There is a cap screwed onto the very top and through a hole in it is attached a loop of nylon rope. The loop goes around your wrist so that you don't lose the spud through the hole in the ice. It is also used early and late in the season to check for safety. If I can't poke a hole all the way through the ice with a hard jab, it is thick enough to walk on. It weighs about 8 pounds, but comes apart in the middle so that it is easy to transport.

It is less work to chip a 6 inch hole through 6 inches of ice with the spud, than with my ice auger.

.......Elvis Lives
Stewie is offline   Reply With Quote