Striper Talk Striped Bass Fishing, Surfcasting, Boating - View Single Post

nightfighter · 01-18-2018, 05:50 PM

Chris, I don't think you are going to be successful with "peeling" the laminate off and will likely be finding particle board underneath. I would suggest looking into replacement doors and drawer fronts. Hopefully the cabinet face frames can be scuffed up enough to hold paint on them.
Maybe get some measurements and counts of what you need and get some quotes... PM Bruce too.

edit
If they are just flat, maybe a sheet or two of 3/4 MDF, cut to size (use a cut sheet) drill for European hinges, paint and install..... A track saw would be good to have access to for the cutting. I have some hangers that fit into the hinge holes for painting them if you want to borrow. Benjamin Moore has a new line of paint that floats out nicely if you don't have a sprayer.

01-18-2018, 05:50 PM	#2
nightfighter Seldom Seen iTrader: (0) Join Date: May 2001 Posts: 10,393	Chris, I don't think you are going to be successful with "peeling" the laminate off and will likely be finding particle board underneath. I would suggest looking into replacement doors and drawer fronts. Hopefully the cabinet face frames can be scuffed up enough to hold paint on them. Maybe get some measurements and counts of what you need and get some quotes... PM Bruce too. edit If they are just flat, maybe a sheet or two of 3/4 MDF, cut to size (use a cut sheet) drill for European hinges, paint and install..... A track saw would be good to have access to for the cutting. I have some hangers that fit into the hinge holes for painting them if you want to borrow. Benjamin Moore has a new line of paint that floats out nicely if you don't have a sprayer. Last edited by nightfighter; 01-18-2018 at 05:59 PM..
	“Americans have the right and advantage of being armed, unlike the people of other countries, whose leaders are afraid to trust them with arms.” – James Madison.