Quote:
Originally Posted by Rockfish9
sealing the lower unit is not difficult... it does require a few techniques and special tools..
Easiest way to find the exact problem is to drop the lower unit...drain the oil and make an adapter to pressurize the lower unit.. 3-6psi is plenty ( use a regulator)... remove the water pump so you can observe the seals.... with the L.U. pressurized... spray soapy water ( a few drops of dish detergent works well in a spray bottle).. spray the prop[ shaft... shift shaft and drive shaft... the leak will appear as a foamy bubble where the problem exists...
|
Boat is going into storage on Saturday, will an outboard that sits in a covered area for the winter with the LU removed suffer issues? Maybe just lather a healthy dose of grease on virgin metal areas?
That would be the ideal scenario for me because it would let me take a longer term approach to the project.
Posted from my iPhone/Mobile device