|
Very good info here!
I carefully pour resin into small medical cup to first measure.
I very carefully pour hardner into medical same cup to second measure.
E-tex is a 50/50 1:1 mix so they must be exact and in one cup.
Mix with flat ended Popsicle stick and really scrape those sides and bottom.
Pour final mix into those flat alum.round rod building trays and scrape everything you can out of that medical cup. Quick re-mix in the tray and apply.
(good info to clean everything with some Denatured Alcohol before starting even if everything looks clean. Those acid brushes sometimes have oil all over them)
|